Falcon – A Machine For Mankind

  • Inventor of 60 ft. (18 mtr.) Duty Point Head per Storage in V6 Borewell!
Menu

4″ Submersible Pumpset

  • Home
  • 4″ Submersible Pumpset

4″ Submersible Pumpset

View Catalogue
Material Of Construction - Motor −
  •  Oil Seal : Nitrile butyl rubber
  •  Motor Shaft : SS – 420
  •  Motor Body Pipe : J4
  •  Motor Bush : LTB-4 / Teflon
  •  Thrust bearing assembly : SS – 420 & Carbon
  •  Diaphragm : High Nitrile Butyl Rubber
  •  Motor Base : Cast Iron / SS – 304
  •  Housing Set : Cast Iron / SS – 304
Material Of Construction - Pump +
  •  Check Valve Housing : Cast iron / SS – 304
  •  Check Valve : SS-410
  •  Outer Shell : J4
  •  Impeller : Noryl / Nylon
  •  Bowl : Noryl / Cast Iron / SS
  •  Counter Bush : LTB-4 / SS – 304
  •  Pump Bush : NBR / LTB 4
  •  Pump Sleeve : SS-410
  •  Suction : Cast iron / SS – 304
  •  Pump Shaft : SS-410
  •  Coupling / Pump Couple : SS-410
Read & Understand Benifits +
  •  Motor portion covered with corrosive resistance Stainless steel J4 shell
  •  More durability and hygiene
  •  High operating efficiency
  •  Specially designed thrust bearing to withstand high axial thrust load
  •  Extremely hardwearing water lubricated bearing
  •  Thread type motor construction ensures service feasibility
  •  Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the   life of the pump set
  •  Designed for wide voltage operation
  •  Best alternative for JET & Compressor pump set
  •  Additional intermediate bearing in higher stage pumps.
Product Specification : +
  •  Power Range : 0.37 kW to 4.4 kW (0.50 HP to 6.0 HP)
  •  Speed : 2880 RPM
  •  Version : Single Phase 160V to 230V, Three Phase 350 to 415V,50Hz AC Supply.(Single Phase   available in 0.5 HP to 5 HP / Three Phase available in 1 HP to 6 HP)
  •  Head Range : 10 Mtr. To 340 Mtr.
  •  Discharge Range : 450 LPM to 12 LPM
  •  Outlet Size in Inch : 1.0” , 1.25”, 1.5” & 2.0”
  •  Degree of Protection : IP 58
  •  Direction of Rotation Minimum cooling : Counter clockwise from driving end -1ph: Electrically   Reversible -3ph
  •  Thrust load : 0.37 kW – 0.75 kW- 650 lbs, 1.1 kW -1.5 kW -1000 lbs, 2.2kW – 7.5 kW -1500 lbs.
  •  Flow along the motor : 0.15 m/sec.
  •  Type of duty : S1 (continues)
  •  Method of starting : 1ph-Capacitor Start Capacitor Run (CSCR): 3ph –Direct Online (D.O.L)
  •  Maximum starts per hour : 20 times
Salient Features : +
  •  Motor portion covered with corrosive resistance Stainless steel J4 shell
  •  More durability and hygiene
  •  High operating efficiency
  •  Specially designed thrust bearing to withstand high axial thrust load
  •  Extremely hardwearing water lubricated bearing
  • Thread type motor construction ensures service feasibility
  •  Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the   life of the pump set
  •  Designed for wide voltage operation
  •  Best alternative for JET & Compressor pump set
  •  Additional intermediate bearing in higher stage pumps.

Product Application

Farming
Gardening
Domestic
Water Supply
Industrial

Farming

Gardening

Domestic

Water Supply

Industrial

Similar Products