Falcon – A Machine For Mankind

  • Inventor of 60 ft. (18 mtr.) Duty Point Head per Storage in V6 Borewell!
Menu

5″ Submersible Pumpset

  • Home
  • 5″ Submersible Pumpset

5″ Submersible Pumpset

View Catalogue
Material Of Construction - Motor −
  •  Oil Seal : Nitrile butyl rubber
  •  Motor Shaft : SS – 420
  •  Motor Body Pipe : J4
  •  Motor Bush : LTB-4 / Teflon
  •  Thrust bearing assembly : SS – 420 & Carbon
  •  Diaphragm : High Nitrile Butyl Rubber
  •  Motor Base : Cast Iron
  •  Housing Set : Cast Iron
Material Of Construction - Pump +
  •  Check Valve Housing : Cast iron / SS-304
  •  Check Valve : SS-304 / Nylon
  •  Outer Shell : J4 / SS – 304
  •  Impeller : Noryl / Nylon / SS-410
  •  Bowl : Noryl / Cast Iron / SS-304
  •  Counter Bush : LTB-4 / SS – 304
  •  Pump Bush : NBR / LTB 4
  •  Pump Sleeve : SS-410
  •  Suction : Cast iron / SS-304
  •  Pump Shaft : SS-410
  •  Coupling / Pump Couple : SS-410
Read & Understand Benifits +
  •  SS 304 Grade Investment Casting Bowl and Impeller in Radial Flow Series.(GRS -Series)
  •  9 Mtr. Head Per Stage In Radial Flow Series.
  •  Specially designed high performance thrust bearing (SS-420 tilting pad with carbon plate) to   withstand axial thrust loads.
  •  Dynamically balanced roating parts ensure minimum vibration and longer life
  •  Motor Portion covered with corrosion resistant stainless steel J4 shell
  •  More durability and hygiene
  •  High operating efficiency
  •  Extremely hardwearing water lubricated bearing
  • Thread type motor construction ensures service feasibility
  •  Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pump set
  •  Designed for wide voltage operation
  •  Best alternative for JET & Compressor pump set
  •  Additional intermediate bearing in higher stage pumps
  •  Fully SS pumps are available in (GRS – Series)
Product Specification : +
  •  Power Range : 2.2 kW to 9.3 kW (3 HP to 12.5HP)
  •  Speed : 2880 RPM
  •  Version : Single Phase 180V to 230V, Three Phase 350 to 415V, 50Hz AC Supply (Single Phase available in 3 HP to 5 HP)
  •  Head Range : 12 Mtr. To 640 Mtr.
  •  Discharge Range : 690 LPM to 80 LPM
  •  Outlet Size in Inch : 1.5” , 2.0″ & 2.5″
  •  Degree of Protection : IP 58
  •  Direction of Rotation Minimum cooling : Counter clockwise from driving end -1ph: Electrically Reversible -3ph
  •  Thrust load : 2.2 kW – 4.5 kW- 3500 lbs, 5.5 kW to 9.3 kW -6000 lbs
  •  Flow along the motor : 0.15 m/sec.
  •  Type of duty : S1 (continues)
  •  Method of starting : 1ph-Capacitor Start Capacitor Run (CSCR) up to 2.2 kW, 3ph – Direct Online (D.O.L.) upto 5.5 kW, Star Delta (SD) upto 9.3 kW
  •  Max. starts per hour : 20 times
Salient Features : +
  •  SS 304 Grade Investment Casting Bowl and Impeller in Radial Flow Series.(GRS -Series)
  •  9 Mtr. Head Per Stage In Radial Flow Series.
  •  Specially designed high performance thrust bearing (SS-420 tilting pad with carbon plate) to withstand axial thrust loads.
  •  Dynamically balanced roating parts ensure minimum vibration and longer life
  •  Motor Portion covered with corrosion resistant stainless steel J4 shell
  •  More durability and hygiene
  •  High operating efficiency
  •  Extremely hardwearing water lubricated bearing
  •  Thread type motor construction ensures service feasibility
  •  Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pump set
  •  Designed for wide voltage operation
  •  Best alternative for JET & Compressor pump set
  •  Additional intermediate bearing in higher stage pumps
  •  Fully SS pumps are available in (GRS – Series)

Product Application

Farming
Gardening
High Depth Borewell
Water Supply
Industrial

Farming

Gardening

Domestic

Water Supply

Industrial

Similar Products