7″ Submersible Pumpset
- Home
- 7″ Submersible Pumpset
7″ Submersible Pumpset
Material Of Construction - Motor
- Oil Seal : Nitrile butyl rubber
- Motor Shaft : SS – 420
- Motor Body Pipe : J4
- Motor Bush : LTB-4 / Teflon
- Thrust bearing assembly : SS – 420 & Carbon
- Diaphragm : High Nitrile Butyl Rubber
- Motor Base : Cast Iron / SS – 304
- Housing Set : Cast Iron / SS – 304
Material Of Construction - Pump
- Check Valve Housing : Cast iron / SS – 304
- Check Valve : SS-410 / Nylon
- Impeller : SS-410
- Bowl : Cast Iron
- Counter Bush : LTB-4 / SS – 304
- Pump Bush : NBR / LTB 4
- Pump Sleeve : SS-410
- Suction : Cast iron / SS – 304
- Pump Shaft : SS-410
- Coupling / Pump Couple : SS-410
Read & Understand Benifits
- Cast iron casting bowl and SS-410 grade impeller in mix flow series
- Specially designed high performance thrust bearing (SS-420 Tilting Pad with Carbon plate) to with stand axial thrust loads.
- Dynamically balanced rotating parts ensures minimum vibration and longer life
- Motor portion covered with corrosive resistance Stainless steel J4 shell
- More durability and hygiene
- High operating efficiency
- Special designed thrust bearing to withstand high axial thrust load
- Extremely hardwearing water lubricated bearing
- Thread type motor construction ensures services feasibility
- Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pump set
- Designed for wide voltage operation
- Best alternative for JET & Compressor pump set
- Additional intermediate bearing in higher stage pumps
Product Specification :
- Power Range : 11.2 kW to 37.3 kW (15 HP to 50 HP)
- Speed : 2880 RPM
- Version : Three Phase 350 to 415V, 50Hz AC Supply.
- Head Range : 18 Mtr. To 650 Mtr.
- Discharge Range : 1860 LPM to 55 LPM
- Outlet Size in Inch : 2.0” , 2.5” , 3.0” & 4.0”
- Degree of Protection : IP 58
- Direction of Rotation : Electrically Reversible -3ph
- Thrust load : 11.2 kW -37.3 kW -8000 lbs
- Minimum cooling Flow along the motor : 0.15 m/sec.
- Type of duty : S1 (continues)
- Method of starting : 3 ph -Direct Online (D.O.L) upto 5.5 kW, Star Delta (SD) upto 37.3 kW
- Max. starts per hour : 20 times
Salient Features :
- Cast iron casting bowl and SS-410 grade impeller in mix flow series
- Specially designed high performance thrust bearing (SS-420 Tilting Pad with Carbon plate) to with stand axial thrust loads.
- Dynamically balanced rotating parts ensures minimum vibration and longer life
- Motor portion covered with corrosive resistance Stainless steel J4 shell
- More durability and hygiene
- High operating efficiency
- Special designed thrust bearing to withstand high axial thrust load
- Extremely hardwearing water lubricated bearing
- Thread type motor construction ensures services feasibility
- Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pump set
- Designed for wide voltage operation
- Best alternative for JET & Compressor pump set
- Additional intermediate bearing in higher stage pumps
Product Application
Farming
Gardening
Deep Well
Water Supply
Industrial
Farming
Gardening
Domestic
Water Supply
