10″ Submersible Motors
- Home
- 10″ Submersible Motors
10″ Submersible Motors
Material Of Construction - Motor
- Oil Seal : Nitrile butyl rubber
- Motor Shaft : SS – 420
- Motor Body Pipe : SS -240Cu
- Motor Bush : LTB-4 / Teflon
- Thrust bearing assembly : SS – 420 & Carbon
- Diaphragm : High Nitrile Butyl Rubber
- Motor Base : Cast Iron
- Housing Set : Cast Iron
Material Of Construction - Pump
- Check Valve Housing : Cast iron
- Check Valve : SS-410
- Impeller : SS-304 / SS-410
- Bowl : SS-304 / Cast Iron
- Counter Bush : LTB-4 / SS – 304
- Pump Bush : NBR / LTB 4
- Pump Sleeve : SS-410
- Suction : Cast iron
- Pump Shaft : SS-410
- Coupling / Pump Couple : SS-410
Read & Understand Benifits
- SS 304 Grade Investment Casting Bowl and SS-304 Grade Impeller in radial flow MRS series 27Mtr head per stage in radial flow series.
- FG 250 Cast Iron Bowl with CED Catted and SS-304 Grade Impeller in Mix flow FMC Series 22Mtr head per stage in Mix flow series.
- Specially designed high performance thrust bearing (SS-420 Tilting Pad with Carbon plate) to with stand axial thrust loads.
- Dynamically balanced rotating parts ensures minimum vibration and longer life.
- Designed for wide voltage fluctuations.
- Motor portion covered with corrosive resistance Stainless steel (SS 304) shell.
- More durability and hygiene.
- High operating efficiency.
- Specially designed thrust bearing to withstand high axial thrust load.
- Extremely hardwearing water lubricated bearing.
- Thread type motor construction ensures service feasibility.
- Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pump set.
- Designed for wide voltage operation.
- Best alternative for JET & Compressor pump set.
- Additional intermediate bearing in higher stage pumps.
Product Specification :
- Power Range : 55 kW to 112 kW (75 HP to 150HP)
- Speed : 2900 RPM
- Version : Three Phase 350V to 415V, 50Hz, AC Supply
- Head Range : 12 Mtr. to 300 Mtr.
- Discharge Range : 3600 LPM to 960 LPM
- Outlet Size in Inch : 4.0” and 5.0″
- Degree of Protection : IP 58
- Maximum starts per hour : 10 times
Salient Features :
- SS 304 Grade Investment Casting Bowl and SS-304 Grade Impeller in radial flow MRS series 27Mtr head per stage in radial flow series.
- FG 250 Cast Iron Bowl with CED Catted and SS-304 Grade Impeller in Mix flow FMC Series 22Mtr head per stage in Mix flow series.
- Specially designed high performance thrust bearing (SS-420 Tilting Pad with Carbon plate) to with stand axial thrust loads.
- Dynamically balanced rotating parts ensures minimum vibration and longer life.
- Designed for wide voltage fluctuations.
- Motor portion covered with corrosive resistance Stainless steel (SS 304) shell.
- More durability and hygiene.
- High operating efficiency.
- Specially designed thrust bearing to withstand high axial thrust load.
- Extremely hardwearing water lubricated bearing.
- Thread type motor construction ensures service feasibility.
- Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pump set.
- Designed for wide voltage operation.
- Best alternative for JET & Compressor pump set.
- Additional intermediate bearing in higher stage pumps.
Product Application
Farming
Fire Fighting Application
Large Scale Farming
Water Supply
Industrial
Farming
Gardening
Domestic
Water Supply
